Digga Bigfoot turns mini-skid steer, skid steer, CTL into trencher oleh - distributorbekominikomatsu.xyz

Halo sahabat selamat datang di website distributorbekominikomatsu.xyz, pada kesempatan hari ini kita akan membahas seputar Digga Bigfoot turns mini-skid steer, skid steer, CTL into trencher, kami sudah mempersiapkan artikel tersebut dengan informatif dan akurat, silahkan membaca

Digga Bigfoot Trencher

If you want to turn your skid steer, compact track loader or compact utility loader (also known as a mini skid steer) into a trencher, Skid Steer Solutions is now offering Digga Bigfoot Trencher attachments.

The trenchers, manufactured by Australia-based Digga, come in three models, with max cutting depths ranging from 3 to 4 feet. They can be used for such tasks as laying irrigation pipe and underground power and communications lines, making road repairs and for general construction.

Features on the models include an Eaton motor, a three-preset depth-control foot for consistent depth, and a large spoil auger for efficient spoil removal. The depth foot can be seen from the cab. The frame can be side shifted for digging close to permanent structures, and a patented Head Start Crumber System allows trenching to begin with the crumber down so the operator doesn't have to leave the cab.

Digga bigfoot xd trencher skid steerThree chain options are available, with widths ranging from 4 to 12 inches:

Earth – has a cup tooth on every second station for efficient trenching in earth.

Combination – has a combination of earth and tungsten teeth for trenching in rocky earth conditions.

Diggatac – Full tungsten teeth on every station for trenching in concrete, asphalt and frozen ground.

To watch a video of the Bigfoot in action, see below:

 

Quick specs

Specs for Digga Bigfoot Trencher models:

 

Mini-skid steer 

Max Cutting Depth: 3 feet

Hydraulic Flow Requirement: 13 to 25 gallons per minute

Max Pressure: 3500 PSI @ 16 GPM

Max Flow: 25 GPM @ 2900 PSI

Max Continuous Power: 34 HP

Motor: 2K Bell Eaton

Weight: 320 lbs.

Width: 38″

Length: 74″

 

Skid steer, 3-foot trencher

Max Cutting Depth: 36″

Flow Requirement: 13-25 GPM

Max Pressure: 3500 PSI @ 16 GPM

Max Flow: 25 GPM @ 2900 PSI

Max Continuous Power: 34 HP

Motor: 2K Bell Eaton

Chain Width: 4-8″

Chain Pitch: 1 5/8″

Weight: 700 lbs.

 

Skid steer, 4-foot trencher

Max Depth: 48″

Flow Requirement: 16-30 GPM

Max Continuous Power: 34 HP

Motor: 2K Bell Eaton

Chain Width: 6-12″

Chain Pitch: 2″

Weight: 1,090 lbs.

 

 

Itulah tadi informasi mengenai Digga Bigfoot turns mini-skid steer, skid steer, CTL into trencher dan sekianlah artikel dari kami distributorbekominikomatsu.xyz, sampai jumpa di postingan berikutnya. selamat membaca.

Posting Komentar

0 Komentar